kernel-5.14.0-687.58.1.el9_8
エラータID: AXSA:2026-2317:127
The kernel packages contain the Linux kernel, the core of any Linux operating system.
Security Fix(es):
* kernel: net/sched: act_ct: Only release RCU read lock after ct_ft (CVE-2026-46319)
* kernel: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch (CVE-2026-53011)
* kernel: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs (CVE-2026-64030)
* kernel: wifi: cfg80211: use wiphy work for socket owner autodisconnect (CVE-2026-68404)
* kernel: Linux kernel: Denial of Service due to use-after-free in act_tunnel_key (CVE-2026-68377)
* kernel: net/iucv: fix use-after-free of a severed iucv_path (CVE-2026-68140)
* kernel: wifi: mac80211: defer link RX stats percpu free to RCU (CVE-2026-68409)
* kernel: KVM: arm64: vgic: Handle race between interrupt affinity change and LPI disabling (CVE-2026-72288)
* kernel: ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get (CVE-2026-72262)
* kernel: netfilter: nft_lookup: fix catchall element handling with inverted lookups (CVE-2026-72320)
* kernel: ALSA: usx2y: bound the hwdep mmap fault offset (CVE-2026-74641)
* kernel: udp: fix potential use-after-free in tunnel segmentation (CVE-2026-74705)
* kernel: net/smc: carry oversized SMC-Rv2 LLC messages in the queue entry (CVE-2026-80985)
* kernel: svcrdma: Validate Read chunk positions before reconstruction (CVE-2026-89526)
* kernel: net/iucv: filter frames in afiucv_hs_rcv() by ingress device (CVE-2026-81003)
* kernel: NFSD: Prevent client use-after-free during blocked-lock reaping (CVE-2026-90036)
* kernel: SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry (CVE-2026-93207)
* kernel: svcrdma: Reject Write/Reply chunks with segcount 0 (CVE-2026-93228)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
CVE-2026-46319
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params) { void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1]
CVE-2026-53011
In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time.
CVE-2026-64030
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration").
CVE-2026-68140
In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued.
CVE-2026-68377
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-after-free in tunnel_key_release_params(). The function releases the metadata_dst of the old params synchronously via dst_release() while deferring the params struct free with kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may still hold the old params pointer (under rcu_read_lock_bh) and proceed to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's dst_release has already pushed the dst's rcuref to RCUREF_DEAD. zdi-disclosures@trendmicro.com produced a poc which i (and Victor) verified that KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109 BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173 BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168 Write of size 4 at addr ffff88806158de40 by task poc/9388 CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy) Tainted: [W]=WARN Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 kasan_check_range+0x125/0x200 mm/kasan/generic.c:200 instrument_atomic_read_write include/linux/instrumented.h:112 atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 __rcuref_put include/linux/rcuref.h:109 rcuref_put include/linux/rcuref.h:173 dst_release+0x5b/0x370 net/core/dst.c:168 refdst_drop include/net/dst.h:272 skb_dst_drop include/net/dst.h:284 skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163 skb_release_all net/core/skbuff.c:1187 [..] Allocated by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 __kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 __do_kmalloc_node mm/slub.c:5296 __kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 kzalloc_noprof include/linux/slab.h:1188 offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35 tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 [..] Freed by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 __kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 slab_free_hook mm/slub.c:2689 slab_free mm/slub.c:6251 kfree+0x21f/0x6b0 mm/slub.c:6566 tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 The buggy address belongs to the object at ffff88806158de00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff88806158de00, ffff88806158df00) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c head: order:1 mapcount:0 entire_map ---truncated---
CVE-2026-68404
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev.
CVE-2026-68409
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain.
CVE-2026-72262
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get The ipc_control_data buffer is allocated as kzalloc(max_size), where max_size covers the entire struct sof_ipc_ctrl_data including its flexible array payload. However, the bounds checks in bytes_ext_put and _bytes_ext_get compared user data lengths against max_size directly, ignoring that cdata->data sits at an offset of sizeof(struct sof_ipc_ctrl_data) bytes into the allocation. This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past the end of the heap buffer from unprivileged userspace via the ALSA TLV kcontrol interface, and similarly allowed over-reading adjacent heap data on the get path. Fix all bounds checks to subtract sizeof(*cdata) from max_size so they reflect the actual space available at the cdata->data offset. Also fix the error-path restore in bytes_ext_put which wrote to cdata->data instead of cdata, causing the same overflow.
CVE-2026-72288
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Handle race between interrupt affinity change and LPI disabling Hyunwoo Kim reports some really bad races should the following situation occur: - LPI-I is pending in vcpu-B's AP list - vcpu-A writes to vcpu-B's RD to disable its LPIs - vcpu-C moves I from B to C If the last two race nicely enough, vgic_prune_ap_list() can drop the irq and AP list locks, reacquire them, and in the interval the irq has been freed. UAF follows. The fix is two-fold: - Before dropping the irq and ap_list locks, take a reference on the irq - Do not try to handle migration of the pending bit: there is no expectation that this state is retained, as per the architecture With that, we're sure that the interrupt is still around, and we safely remove it from the AP list as it has no target at this stage (unless another interrupt fires, but that's another story).
CVE-2026-72320
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_lookup: fix catchall element handling with inverted lookups nft_lookup_eval() decides whether a lookup matched (`found`) from the direct set lookup and priv->invert before falling back to the catchall element used by interval sets (e.g. nft_set_rbtree) for the open-ended default range. Since `found` is never recomputed after `ext` is replaced by the catchall lookup, inverted lookups (NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the catchall element, producing the wrong verdict. Fold the catchall lookup into `ext` before computing `found`, matching the order already used by nft_objref_map_eval().
CVE-2026-74641
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee
CVE-2026-74705
In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free.
CVE-2026-80985
In the Linux kernel, the following vulnerability has been resolved: net/smc: carry oversized SMC-Rv2 LLC messages in the queue entry smc_llc_rmt_delete_rkey() and smc_llc_save_add_link_rkeys() read the part of a v2 message that does not fit into the 44-byte union smc_llc_msg, and both bound themselves by the size of the buffer it landed in, not by what arrived. On a link with a shared v2 receive buffer a 44-byte DELETE_RKEY_V2 declaring 255 rkeys reaches rkey[9..254] in whatever an earlier message left in lgr->wr_rx_buf_v2, and passes each of them to smc_rtoken_delete(). One of those 255 matched a registered rtoken and deleted it. An ADD_LINK on such a link installs up to 255 rtokens from the same bytes. Copy the tail into the queue entry, so its length is the length of the message that arrived, and declare the rkeys that fit inline as a member of the union instead of reaching them through a cast. The same DELETE_RKEY_V2 now processes the 9 rkeys it carries. The copy is limited to the longest tail the two functions can read, so the peer does not pick the size of the entry. The bound the previous patch placed on links without a shared v2 receive buffer is no longer needed.
CVE-2026-81003
In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_userid, even on a guest that also has a HiperSockets device carrying the same identifier. The child socket created by afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV. The socket delivered to accept() is unusable. Second, a frame arriving on one netdev can be delivered to a socket bound to a different IQD device. Which can lead to - Accept-queue exhaustion (DoS) - Attacker-controlled peer identity in the child socket - Data injection into existing sockets - Fabric noise on the IQD fabric, where bogus replies are sent - killing established connections Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a namespace can be delivered to an IUCV socket. So a process in an unprivileged user and network namespace holding only the CAP_NET_RAW capability valid within that namespace can send a raw ETH_P_AF_IUCV frame on its own lo device and have it matched against init_net sockets. Fix all three by skipping any socket whose hs_dev does not match the ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress dev is never NULL, so classic sockets are skipped automatically. An unbound HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket is only reachable from the exact IQD device it was bound to. Because hs_dev is always a device in init_net (iucv_sock_bind() scans for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress device belongs to another namespace never matches any socket. Note that AF_IUCV over HiperSockets provides no per-connection authentication: no sequence numbers, no TLS, no nonce. The four name fields identifying a connection are exchanged in plaintext on the shared HiperSockets segment (VCHID). Any host on the same HiperSockets segment could spoof any frame type against an existing connection. That is a protocol-level property unchanged by this patch. The fix reduces the attack surface to peers present on the same HiperSockets segment.
CVE-2026-89526
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path.
CVE-2026-90036
In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its only remaining reference a blocked lock on nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but no reference keeping the client alive. When the per-net laundromat reaps such a lock, freeing the nbl drops the owner reference held through flc_owner, and the final nfs4_put_stateowner() takes the client's cl_lock. Because the laundromat detaches the nbl first, __destroy_client() no longer finds it, so a concurrent force_expire_client() can free the client before nfs4_put_stateowner() runs, dereferencing cl_lock in freed memory. Pin the client with cl_rpc_users before dropping nn->blocked_locks_lock, and skip clients already expiring, whose blocked locks __destroy_client() frees while holding an owner reference. Take nn->client_lock outside nn->blocked_locks_lock. Every other site holds nn->blocked_locks_lock as a leaf, acquiring no further lock, so placing nn->client_lock outside it cannot form a lock-order cycle.
CVE-2026-93207
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry svcauth_gss_decode_credbody() writes the caller's rpc_gss_wire_cred field by field and assigns gc_ctx.len only on the success tail. The caller storage is svcdata->clcred, which lives in the per-svc_rqst gss_svc_data and is reused across requests. Early decode failures leave partially decoded state mixed with residue from the prior request. The trailing body_len tightness check is the sharpest case: xdr_stream_decode_opaque_inline() has already written gc_ctx.data with a borrowed inline pointer into the current request's XDR pages, but gc_ctx.len retains its prior value. Once the request pages are released the pooled clcred carries a dangling pointer paired with a stale length. Zero the caller's rpc_gss_wire_cred at function entry so that every early-return path leaves a deterministic all-zero cred. On the trailing tightness-check path, gc_ctx.len is now zero instead of stale, which neuters length-driven consumers such as gss_svc_searchbyctx() that would otherwise walk the dangling data pointer.
CVE-2026-93228
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list.
Update packages.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params) { void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1]
In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration").
In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-after-free in tunnel_key_release_params(). The function releases the metadata_dst of the old params synchronously via dst_release() while deferring the params struct free with kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may still hold the old params pointer (under rcu_read_lock_bh) and proceed to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's dst_release has already pushed the dst's rcuref to RCUREF_DEAD. zdi-disclosures@trendmicro.com produced a poc which i (and Victor) verified that KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109 BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173 BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168 Write of size 4 at addr ffff88806158de40 by task poc/9388 CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy) Tainted: [W]=WARN Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 kasan_check_range+0x125/0x200 mm/kasan/generic.c:200 instrument_atomic_read_write include/linux/instrumented.h:112 atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 __rcuref_put include/linux/rcuref.h:109 rcuref_put include/linux/rcuref.h:173 dst_release+0x5b/0x370 net/core/dst.c:168 refdst_drop include/net/dst.h:272 skb_dst_drop include/net/dst.h:284 skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163 skb_release_all net/core/skbuff.c:1187 [..] Allocated by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 __kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 __do_kmalloc_node mm/slub.c:5296 __kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 kzalloc_noprof include/linux/slab.h:1188 offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35 tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 [..] Freed by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 __kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 slab_free_hook mm/slub.c:2689 slab_free mm/slub.c:6251 kfree+0x21f/0x6b0 mm/slub.c:6566 tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 The buggy address belongs to the object at ffff88806158de00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff88806158de00, ffff88806158df00) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c head: order:1 mapcount:0 entire_map ---truncated---
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain.
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get The ipc_control_data buffer is allocated as kzalloc(max_size), where max_size covers the entire struct sof_ipc_ctrl_data including its flexible array payload. However, the bounds checks in bytes_ext_put and _bytes_ext_get compared user data lengths against max_size directly, ignoring that cdata->data sits at an offset of sizeof(struct sof_ipc_ctrl_data) bytes into the allocation. This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past the end of the heap buffer from unprivileged userspace via the ALSA TLV kcontrol interface, and similarly allowed over-reading adjacent heap data on the get path. Fix all bounds checks to subtract sizeof(*cdata) from max_size so they reflect the actual space available at the cdata->data offset. Also fix the error-path restore in bytes_ext_put which wrote to cdata->data instead of cdata, causing the same overflow.
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Handle race between interrupt affinity change and LPI disabling Hyunwoo Kim reports some really bad races should the following situation occur: - LPI-I is pending in vcpu-B's AP list - vcpu-A writes to vcpu-B's RD to disable its LPIs - vcpu-C moves I from B to C If the last two race nicely enough, vgic_prune_ap_list() can drop the irq and AP list locks, reacquire them, and in the interval the irq has been freed. UAF follows. The fix is two-fold: - Before dropping the irq and ap_list locks, take a reference on the irq - Do not try to handle migration of the pending bit: there is no expectation that this state is retained, as per the architecture With that, we're sure that the interrupt is still around, and we safely remove it from the AP list as it has no target at this stage (unless another interrupt fires, but that's another story).
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_lookup: fix catchall element handling with inverted lookups nft_lookup_eval() decides whether a lookup matched (`found`) from the direct set lookup and priv->invert before falling back to the catchall element used by interval sets (e.g. nft_set_rbtree) for the open-ended default range. Since `found` is never recomputed after `ext` is replaced by the catchall lookup, inverted lookups (NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the catchall element, producing the wrong verdict. Fold the catchall lookup into `ext` before computing `found`, matching the order already used by nft_objref_map_eval().
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free.
In the Linux kernel, the following vulnerability has been resolved: net/smc: carry oversized SMC-Rv2 LLC messages in the queue entry smc_llc_rmt_delete_rkey() and smc_llc_save_add_link_rkeys() read the part of a v2 message that does not fit into the 44-byte union smc_llc_msg, and both bound themselves by the size of the buffer it landed in, not by what arrived. On a link with a shared v2 receive buffer a 44-byte DELETE_RKEY_V2 declaring 255 rkeys reaches rkey[9..254] in whatever an earlier message left in lgr->wr_rx_buf_v2, and passes each of them to smc_rtoken_delete(). One of those 255 matched a registered rtoken and deleted it. An ADD_LINK on such a link installs up to 255 rtokens from the same bytes. Copy the tail into the queue entry, so its length is the length of the message that arrived, and declare the rkeys that fit inline as a member of the union instead of reaching them through a cast. The same DELETE_RKEY_V2 now processes the 9 rkeys it carries. The copy is limited to the longest tail the two functions can read, so the peer does not pick the size of the entry. The bound the previous patch placed on links without a shared v2 receive buffer is no longer needed.
In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_userid, even on a guest that also has a HiperSockets device carrying the same identifier. The child socket created by afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV. The socket delivered to accept() is unusable. Second, a frame arriving on one netdev can be delivered to a socket bound to a different IQD device. Which can lead to - Accept-queue exhaustion (DoS) - Attacker-controlled peer identity in the child socket - Data injection into existing sockets - Fabric noise on the IQD fabric, where bogus replies are sent - killing established connections Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a namespace can be delivered to an IUCV socket. So a process in an unprivileged user and network namespace holding only the CAP_NET_RAW capability valid within that namespace can send a raw ETH_P_AF_IUCV frame on its own lo device and have it matched against init_net sockets. Fix all three by skipping any socket whose hs_dev does not match the ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress dev is never NULL, so classic sockets are skipped automatically. An unbound HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket is only reachable from the exact IQD device it was bound to. Because hs_dev is always a device in init_net (iucv_sock_bind() scans for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress device belongs to another namespace never matches any socket. Note that AF_IUCV over HiperSockets provides no per-connection authentication: no sequence numbers, no TLS, no nonce. The four name fields identifying a connection are exchanged in plaintext on the shared HiperSockets segment (VCHID). Any host on the same HiperSockets segment could spoof any frame type against an existing connection. That is a protocol-level property unchanged by this patch. The fix reduces the attack surface to peers present on the same HiperSockets segment.
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path.
In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its only remaining reference a blocked lock on nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but no reference keeping the client alive. When the per-net laundromat reaps such a lock, freeing the nbl drops the owner reference held through flc_owner, and the final nfs4_put_stateowner() takes the client's cl_lock. Because the laundromat detaches the nbl first, __destroy_client() no longer finds it, so a concurrent force_expire_client() can free the client before nfs4_put_stateowner() runs, dereferencing cl_lock in freed memory. Pin the client with cl_rpc_users before dropping nn->blocked_locks_lock, and skip clients already expiring, whose blocked locks __destroy_client() frees while holding an owner reference. Take nn->client_lock outside nn->blocked_locks_lock. Every other site holds nn->blocked_locks_lock as a leaf, acquiring no further lock, so placing nn->client_lock outside it cannot form a lock-order cycle.
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry svcauth_gss_decode_credbody() writes the caller's rpc_gss_wire_cred field by field and assigns gc_ctx.len only on the success tail. The caller storage is svcdata->clcred, which lives in the per-svc_rqst gss_svc_data and is reused across requests. Early decode failures leave partially decoded state mixed with residue from the prior request. The trailing body_len tightness check is the sharpest case: xdr_stream_decode_opaque_inline() has already written gc_ctx.data with a borrowed inline pointer into the current request's XDR pages, but gc_ctx.len retains its prior value. Once the request pages are released the pooled clcred carries a dangling pointer paired with a stale length. Zero the caller's rpc_gss_wire_cred at function entry so that every early-return path leaves a deterministic all-zero cred. On the trailing tightness-check path, gc_ctx.len is now zero instead of stale, which neuters length-driven consumers such as gss_svc_searchbyctx() that would otherwise walk the dangling data pointer.
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list.
N/A
SRPMS
- kernel-5.14.0-687.58.1.el9_8.src.rpm
MD5: 62f4e0de0f66748d7417fb13e67ca9ca
SHA-256: 6ceda4da8b2005e20ebbf4bc5b97c3b9dfb8c65026256891a1704c285a17c151
Size: 145.61 MB
Asianux Server 9 for x86_64
- kernel-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: f44bfeea119f7e6d8c9581fb2e29b8c0
SHA-256: 2eb4dccbc7f9561b0c401936e40347a11cbd1e485ebb93736e321cd2d854fec7
Size: 1.04 MB - kernel-abi-stablelists-5.14.0-687.58.1.el9_8.noarch.rpm
MD5: a2c9ca7aa6175ab0b69ae9da19790a69
SHA-256: 0cf8868b062fc0b18e8638c92061e6cb8ac1feccf063f479bcf514e7037541e7
Size: 1.08 MB - kernel-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: de09b8d1c7821ca836ca2cdd06ab853f
SHA-256: 12c985c9f8e3bdfb760a7e0b89b28c736e3189736f39685d527e4962fc8c5bd7
Size: 17.37 MB - kernel-cross-headers-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: ee60414f78eafb7d5cc5f106d1d4ee63
SHA-256: 6a8a5219d07d6271a741aa82cb7c665b1c0b6a79b3b5b014f1e13654291b1835
Size: 8.11 MB - kernel-debug-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 7cd41d8641d5a9311e4996f076634927
SHA-256: 9701bfcb8801d6a15d5496dfd9945adc58329d8d06453dd617f7e28bdf200567
Size: 1.04 MB - kernel-debug-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 9c632f8dc75361610625d5aca08d4532
SHA-256: 1a0a4324abd8280708e7231b5a2d02276677b4c9f0b4daafa93174a4f376e4a5
Size: 31.25 MB - kernel-debug-devel-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 25e3111972c680175001ebb308056a9c
SHA-256: 020a86c267cf4920cabd0ad60d465f4de42d874f8d08f7e1ced910eae61b4f4d
Size: 21.47 MB - kernel-debug-devel-matched-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 057b824cee8f2487fd23c29f011c1faa
SHA-256: 4372cc9088f11fb205a0c46bb8bbfa68265d8c6495348a61079198b341a12a0d
Size: 1.04 MB - kernel-debug-modules-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 7806be24d735627ba614f0574ea4763a
SHA-256: bba87d4ded6902cac6785f55c05e1e5f8d1d55c32a99584750295c73de0fe67d
Size: 70.22 MB - kernel-debug-modules-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 1eb9ef280a721dd26e2a94d2a3dac1c4
SHA-256: a39f75b0cb7d08fa4da2eeb4aba181fb984219e1794aa60923193a68d8f58ae1
Size: 49.97 MB - kernel-debug-modules-extra-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 10c2215a022d8d38a9ab6ee4d06f8309
SHA-256: 651c2bc05463bbd72844a08bb8068e45a7d10b1d35550d6404c8f67f29ab9a4b
Size: 1.85 MB - kernel-debug-uki-virt-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 42c74b7b6859650a46f26e49f5fc5d97
SHA-256: 2193a99cb95d7e9165fd51e3c654b590ecc016f9c82660ce656d2a63318efd76
Size: 88.21 MB - kernel-devel-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: a49b03a953f2e6046dc18984131e4857
SHA-256: 676516e568574fac6fe3df1a24546883aed9171fa1c5e9e4387086f90b4a65a4
Size: 21.27 MB - kernel-devel-matched-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: a38e0ae47143ce3f711aee1aac400f0c
SHA-256: 1e1cc593df7f89c7486a338431b60f8cf6526e8397fea99a370c1f6ce65bb89a
Size: 1.04 MB - kernel-doc-5.14.0-687.58.1.el9_8.noarch.rpm
MD5: 4c9d7d990187d0365fab60fe74fc995a
SHA-256: d6e14ba341c25b369b13b844d5e21cc00b77b781d20f9eded5b89b988af8d00d
Size: 39.07 MB - kernel-headers-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 900b39b3e8543c79288a800057818b2a
SHA-256: 4582958afe347b83a28abba1e4af38b73a1a225676a25862b343250f7f2b866a
Size: 2.83 MB - kernel-modules-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: fa0869c9849bbf7a45eee87a36cc14f8
SHA-256: 110439bc4197d47431bf9a86f629b22af51e620062305ac2f384651603840df4
Size: 40.02 MB - kernel-modules-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 3685510de3cfe0a7b7d6fea9a2ef8130
SHA-256: 1c8554b06ef37e64ad970cd1eba315bef20d9b26b00938ccfbb9250de677d940
Size: 31.11 MB - kernel-modules-extra-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 0c98feac8f5c9f49f8c25f2b23438ead
SHA-256: 5682e9a133ba2a19c7770239aabc9e95e859dfad80a0cab18fca312f744ed32c
Size: 1.48 MB - kernel-rt-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 0fb2d033ae242e157df9b6b6f621312f
SHA-256: da4349313983ea83ee3eb68aa99018f6ac875a9fdd7428eb26a1057bfaa7bbe7
Size: 1.04 MB - kernel-rt-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: e551ccbde60c657d8216c37467af7c5d
SHA-256: 32015286f03ffbdc9d517e7510bca6e2aef8c0f1c77ed2396e47b01f26164a4b
Size: 17.27 MB - kernel-rt-debug-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: e8ccefe5301cd8456dfed4e005f003f6
SHA-256: d0373c533e6d7e0cb01889a50229544e1dd6ee8a681756147977e0ba58fc0264
Size: 1.04 MB - kernel-rt-debug-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 97c0aa8c2caac42a9b44f620ad956f37
SHA-256: 077f213ac0047f7dff98ebb178463ecc7e9b7dfc0c2c0b87edba591d2e17f79d
Size: 18.73 MB - kernel-rt-debug-devel-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: ae5bd50b80f5e5fb45b986468d6e6fcb
SHA-256: 17a4acdd45215684291d27f85101f9c20d1be8a632f66395566c032a67455228
Size: 21.40 MB - kernel-rt-debug-modules-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 48ea76295f4d430141ccc62ec237280f
SHA-256: 7cd7707513ce51a1a753d87f40682f7beb58888f234e5384526dc16bb41e701c
Size: 41.63 MB - kernel-rt-debug-modules-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 9eb2440bd381d3521529c03d505f8bfc
SHA-256: d9d6ef90c301bef4fea66a818dbf273da97f18ef145ed52a759bc08d108e46a6
Size: 32.29 MB - kernel-rt-debug-modules-extra-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: a4d89f23970a1a33357262bb7f4c2000
SHA-256: c5842aa84cfccf10c620423903cbc6bf5caf3ee943885fa36aca1ccb03c7a8e4
Size: 1.51 MB - kernel-rt-devel-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 5311bb62fa91325be4836411f932312b
SHA-256: 15203730b5d10415019468b3ec64ef3b09c23a4b45f7d0aebd2e87d92b0ab9ef
Size: 21.26 MB - kernel-rt-modules-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: e7580fac58cb89ebd69066e01fb5006f
SHA-256: e6fdd243f8f56017583d7664c23de3c76f590cfd7a8eee170d2b505378e2a8fc
Size: 40.08 MB - kernel-rt-modules-core-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 18cbbe4d14a6f8e4273237756118eb9c
SHA-256: 8089916e82907d518544e7196bbbb06cc8355f22f4990c256f6fe550535cce08
Size: 31.19 MB - kernel-rt-modules-extra-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: dd09828b37eb6ed735534483c08b4552
SHA-256: 0c44457a80509b78c18505411f998e52b89f01fc776dcd7ac0f2b59c795f11c3
Size: 1.49 MB - kernel-tools-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: d0470f7518d93224b36a195b9d4c35d9
SHA-256: 0295bec0faff14c247eb78548aadb55920e4457e249f761c3910d038c95fc17f
Size: 1.33 MB - kernel-tools-libs-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: c18a26b21fda9ede3c8fe6f21aa4a37f
SHA-256: 56472588dd972a9f8b92d6fe108049aaa82636ad3e7a0d24177875c1a74f6902
Size: 1.06 MB - kernel-tools-libs-devel-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 4ff451c1ee3dffe1bfba8a69c171e614
SHA-256: 118f7b4bf9c4e45ffc4cbc2dcc8caa57717a514f39f3b3da6c76bbbf5dbc8394
Size: 1.05 MB - kernel-uki-virt-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 3aa13da6ce66b5761ee85151fcd5e0f0
SHA-256: ced140071ab5c30765f030aca91151f8e604716f4966fa59e2face8daf8c8545
Size: 66.07 MB - kernel-uki-virt-addons-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: c8f68765db720fa558328a803a2f596e
SHA-256: fe58671f913f405d9ea40668dd0820fdb14786f7c43ee411105fa7652d28aefc
Size: 1.07 MB - libperf-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 0ac2383a9d892d86ae0ebf807f562f76
SHA-256: f1dff49d2ede73cc0141bb50e119dd73b6a7e8c592c798bfd1e29de8f9db5008
Size: 1.07 MB - perf-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 43d4897e7fb955857b6cd3670f822195
SHA-256: 4615b5cfb06cdda0241003c90c6473ab8f8733e4c5fad55429934664bee4082f
Size: 3.46 MB - python3-perf-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: b909fc7c498cca063d352533c95362b8
SHA-256: 7aa7d7e2a4967dbc16b3ffd5570dfec9eb76845156819f1344ab226d6ac4a518
Size: 2.63 MB - rtla-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: bdefc778c0fe566b2ce0f73e1745eb67
SHA-256: a6b97ba6d1e370a086adfdf1a17ac6e3d2c90bd3e3eab4e3e0a7cdff16f3716d
Size: 1.11 MB - rv-5.14.0-687.58.1.el9_8.x86_64.rpm
MD5: 0c3f2a9c6eb2cfb90e39bbffbb0c08bc
SHA-256: 1c356e73b0ccebc84f3c17d7a4de8b8d869b47046d55b903e6622d69cd746d47
Size: 1.06 MB