kernel-5.14.0-687.56.1.el9_8

The kernel packages contain the Linux kernel, the core of any Linux operating system.

Security Fix(es):

* kernel: tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock() (CVE-2025-40149)
* kernel: ipv6: add NULL checks for idev in SRv6 paths (CVE-2026-23442)
* kernel: thermal: core: Fix thermal zone device registration error path (CVE-2026-43332)
* kernel: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 (CVE-2026-46076)
* kernel: gfs2: Fix slab-use-after-free in qd_put (CVE-2026-45861)
* kernel: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths (CVE-2026-46275)
* kernel: KVM: arm64: Reassign nested_mmus array behind mmu_lock (CVE-2026-46317)
* kernel: netfilter: nf_log: validate MAC header was set before dumping it (CVE-2026-52942)
* kernel: gfs2: add some missing log locking (CVE-2026-53049)
* kernel: netfilter: nf_conntrack_sip: don't use simple_strtoul (CVE-2026-52986)
* kernel: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() (CVE-2026-53357)
* kernel: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink (CVE-2026-63829)
* kernel: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() (CVE-2026-63924)
* kernel: ipv6: exthdrs: refresh nh after handling HAO option (CVE-2026-63922)
* kernel: ipv6: validate extension header length before copying to cmsg (CVE-2026-63920)
* kernel: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() (CVE-2026-63993)
* kernel: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() (CVE-2026-63984)
* kernel: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() (CVE-2026-63992)
* kernel: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() (CVE-2026-63994)
* kernel: Kernel SMB client: Double-free vulnerability allows remote denial of service or privilege escalation (CVE-2026-64385)
* kernel: Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb() (CVE-2026-64557)
* kernel: vxlan: require CAP_NET_ADMIN in the device netns for changelink (CVE-2026-68432)
* kernel: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink (CVE-2026-72052)
* kernel: dm-integrity: don't increment hash_offset twice (CVE-2026-72099)
* kernel: KVM: arm64: vgic: Check the interrupt is still ours before migrating it (CVE-2026-72289)
* kernel: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst (CVE-2026-72255)
* kernel: KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active (CVE-2026-74516)
* kernel: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() (CVE-2026-74569)
* kernel: ipvs: clear IPv4 options after rebasing tunnel ICMP errors (CVE-2026-74669)
* kernel: netfilter: flowtable: publish GC-visible tuple last (CVE-2026-74746)
* kernel: ipv6: fix use-after-free in ip6_finish_output2() (CVE-2026-80792)
* kernel: KVM: s390: vsie: zero stale crypto bits (CVE-2026-80921)
* kernel: nvme-tcp: reject a read that transferred too few bytes (CVE-2026-89480)
* kernel: nvme-tcp: fix host memory disclosure on R2T for a read command (CVE-2026-89481)
* kernel: nvme: add missing SRCU grace period in error path (CVE-2026-89972)
* kernel: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() (CVE-2026-90227)
* kernel: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() (CVE-2026-97417)
* kernel: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state (CVE-2026-93288)
* kernel: ipvlan: Make the addrs_lock be per port (CVE-2026-23103)
* kernel: KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use (CVE-2026-53360)
* kernel: vsock/virtio: fix zerocopy completion for multi-skb sends (CVE-2026-53365)
* kernel: NFSD: Fix SECINFO_NO_NAME decode error cleanup (CVE-2026-53398)
* kernel: vsock/virtio: bind uarg before filling zerocopy skb (CVE-2026-63970)
* kernel: igc: set tx buffer type for SMD frames (CVE-2026-64035)
* kernel: idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init() (CVE-2026-64162)
* kernel: vsock/vmci: fix UAF when peer resets connection during handshake (CVE-2026-64115)
* kernel: SUNRPC: pin upper rpc_clnt across the TLS connect_worker (CVE-2026-72317)
* kernel: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev (CVE-2026-74744)
* kernel: nfsd: defer vfree of compound ops to fix rpc_status UAF (CVE-2026-89690)
* kernel: nfsd: initialize copy-notify stateid before publishing it (CVE-2026-89669)
* kernel: svcrdma: Reject inline replies that overflow the pull-up buffer (CVE-2026-89530)
* kernel: nfsd: revoke copy-notify stateids before dropping their reference (CVE-2026-89663)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CVE-2025-40149
In the Linux kernel, the following vulnerability has been resolved: tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock(). get_netdev_for_sock() is called during setsockopt(), so not under RCU. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Note that the only ->ndo_sk_get_lower_dev() user is bond_sk_get_lower_dev(), which uses RCU.
CVE-2026-23442
In the Linux kernel, the following vulnerability has been resolved: ipv6: add NULL checks for idev in SRv6 paths __in6_dev_get() can return NULL when the device has no IPv6 configuration (e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER). Add NULL checks for idev returned by __in6_dev_get() in both seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL pointer dereferences.
CVE-2026-43332
In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path.
CVE-2026-45861
In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey .
CVE-2026-46076
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs]
CVE-2026-46275
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities.
CVE-2026-46317
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Reassign nested_mmus array behind mmu_lock kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which can run at any time. kvm_vcpu_init_nested() reallocates the array and frees the old buffer while holding only kvm->arch.config_lock, so such a walker can reference the freed array. Allocate the new array outside of mmu_lock, as the allocation can sleep. Under the lock, copy the existing entries, fix up the back pointers and reassign the array. Free the old buffer after dropping the lock, as kvfree() can sleep as well.
CVE-2026-52942
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: validate MAC header was set before dumping it The fallback path of dump_mac_header() guards the MAC header access only with "skb->mac_header != skb->network_header", without checking skb_mac_header_was_set(). When the MAC header is unset, mac_header is 0xffff, so the test passes and skb_mac_header(skb) returns skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads dev->hard_header_len bytes out of bounds into the kernel log. This is reachable via the netdev logger: nf_log_unknown_packet() calls dump_mac_header() unconditionally, and an skb sent through AF_PACKET with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still unset (__dev_queue_xmit(), which would reset it, is bypassed). Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already uses, and replace the open-coded MAC header length test with skb_mac_header_len(). Only skbs with an unset MAC header are affected; valid ones are dumped as before. BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831) Read of size 1 at addr ffff88800ea49d3f by task exploit/148 Call Trace: kasan_report (mm/kasan/report.c:595) dump_mac_header (net/netfilter/nf_log_syslog.c:831) nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963) nf_log_packet (net/netfilter/nf_log.c:260) nft_log_eval (net/netfilter/nft_log.c:60) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307) nf_hook_slow (net/netfilter/core.c:619) nf_hook_direct_egress (net/packet/af_packet.c:257) packet_xmit (net/packet/af_packet.c:280) packet_sendmsg (net/packet/af_packet.c:3114) __sys_sendto (net/socket.c:2265)
CVE-2026-52986
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu .
CVE-2026-53049
In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush().
CVE-2026-53357
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master.
CVE-2026-63829
In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK.
CVE-2026-63920
In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options.
CVE-2026-63922
In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage.
CVE-2026-63924
In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.
CVE-2026-63984
In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment.
CVE-2026-63992
In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine.
CVE-2026-63993
In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko.
CVE-2026-63994
In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed.
CVE-2026-64385
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_ioctl() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_ioctl_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free.
CVE-2026-64557
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb() l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after release_sock(parent). Once the parent lock is dropped the newly enqueued child socket sk is reachable via the accept queue, so another task can accept and free it before the callback dereferences sk, resulting in a use-after-free. Rework the ->new_connection() op so the core, rather than the callback, owns the child channel's lifetime. The op now receives a pre-allocated new_chan and returns an errno instead of allocating and returning a channel. l2cap_new_connection() allocates the child channel and links it into the conn list via __l2cap_chan_add() before invoking the callback, so the conn-list reference keeps the channel alive once release_sock(parent) exposes the socket to other tasks. Channel configuration that was duplicated in l2cap_sock_init() and the various new_connection callbacks is consolidated into l2cap_chan_set_defaults(), which now inherits from the parent channel when one is supplied.
CVE-2026-68432
In the Linux kernel, the following vulnerability has been resolved: vxlan: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns vxlan->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in vxlan->net can rewrite a vxlan device whose underlay lives in vxlan->net. vxlan_changelink() validates and applies the new configuration against vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the underlay socket in that netns, so the same reasoning as the tunnel changelink series applies here. Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai).
CVE-2026-72052
In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed.
CVE-2026-72099
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again.
CVE-2026-72255
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst The br_netfilter fake rtable is embedded in struct net_bridge and is attached to bridged packets with skb_dst_set_noref(). If such a packet is queued to NFQUEUE, __nf_queue() upgrades that fake dst with skb_dst_force(). At that point the queued skb can hold a real dst reference after bridge teardown has started. The problem is not that every bridged packet needs its own dst reference. The problem is that NFQUEUE can keep the bridge private fake dst alive after unregister begins. Fix this by keeping the bridge fake dst model unchanged and pinning the bridge master device only while the packet sits in NFQUEUE. Record the bridge device in nf_queue_entry when the queued skb carries a bridge fake dst, take a device reference for the queue lifetime, and drop it when the queue entry is freed. Also make sure queued entries are reaped when that bridge device goes down, and drop the redundant nf_bridge_info_exists() test from the fake dst detection. This keeps netdev_priv(br->dev) alive until verdict completion, so the embedded fake rtable and its metrics backing storage cannot be freed out from under dst_release(). It also avoids the constant refcount bump and avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
CVE-2026-72289
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Check the interrupt is still ours before migrating it vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating an interrupt to another vCPU. After reacquiring the locks it only checks that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq)) before moving the interrupt, which assumes that an interrupt whose affinity is preserved is still queued on this vCPU's ap_list. That assumption no longer holds if the interrupt is taken off the ap_list while the locks are dropped. vgic_flush_pending_lpis() removes the interrupt from the list and sets irq->vcpu to NULL, but leaves enabled/pending/target_vcpu untouched. As the interrupt is still enabled and pending, vgic_target_oracle() returns the same target_vcpu, so the affinity check passes and list_del() is run a second time on an entry that has already been removed. Also check that the interrupt is still assigned to this vCPU (irq->vcpu == vcpu) before moving it.
CVE-2026-74516
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC is fully enabled prior to running L2, and is then inhibited while L2 is active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled, but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of the host's APIC state, send arbitrary interrupts, change task priority, and ultimately trivially DoS the host. E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields: Spurious interrupt (vector 0xee) on CPU#425. Acked And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields: ------------[ cut here ]------------ WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940 CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026 RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd] Call Trace: sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80 asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20 RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm] kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm] kvm_vcpu_ioctl+0x580/0x6b0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46ff4b ---[ end trace 0000000000000000 ]---
CVE-2026-74569
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ...
CVE-2026-74669
In the Linux kernel, the following vulnerability has been resolved: ipvs: clear IPv4 options after rebasing tunnel ICMP errors ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the quoted original request before passing it to icmp_send(). However, IPCB(skb)->opt still describes the outer IPv4 header. A timestamp option in the outer header can therefore leave an offset that points into the quoted transport header after the rebase. __ip_options_echo() treats a byte at that stale location as the option length and copies it into the fixed-size option storage on the __icmp_send() stack, causing a stack out-of-bounds write. Clear the stale option metadata after resetting the network header. Keep the remaining control block fields, including the ingress interface used by the ICMP response path.
CVE-2026-74746
In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.).
CVE-2026-80792
In the Linux kernel, the following vulnerability has been resolved: ipv6: fix use-after-free in ip6_finish_output2() ip6_finish_output2() caches a pointer to the IPv6 destination address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF transmit path or other encapsulation operations within lwtunnel_xmit() can reallocate the skb head, freeing the memory that daddr points to. When lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale daddr pointer to compute the nexthop and to look up or create the neighbour entry. This results in a use-after-free read, which can leak sensitive kernel data, pollute the neighbour table with arbitrary values, misdirect traffic, or crash the system. Fix this by re-fetching the IPv6 header and the destination address pointer after lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop computation and neighbour lookup operate on valid memory.
CVE-2026-80921
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: zero stale crypto bits When shadowing crypto access bits from a format0 apcb (crycb 0 or 1), the bits 64..255 are unchanged from whatever is in the vsie page in the crycb and thus in the apcb. This gives a nested guest potential access to a device no longer available. Zero out the remaining bits.
CVE-2026-89480
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against.
CVE-2026-89481
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix host memory disclosure on R2T for a read command nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers. Reject an R2T for a request that is not a write.
CVE-2026-89972
In the Linux kernel, the following vulnerability has been resolved: nvme: add missing SRCU grace period in error path nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path.
CVE-2026-90227
In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a partition device or write through a read-only file descriptor. Pass flags and open_for_write through and reject disallowed commands with -EACCES.
CVE-2026-93288
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which clears the logger pointer without an RCU grace period. Immediately after, ops_free_list() frees the per-net state while concurrent packets might still be executing nf_log_packet() under rcu_read_lock()." Clear the pointer via .pre_exit to make sure rcu readers have completed before pernet storage is free'd. The change in nf_log_syslog.c is only done for consistency: it doesn't use pernet data.
CVE-2026-97417
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() The timestamp-only fast path dereferences the option stream as *(__be32 *)ptr, which assumes 4-byte alignment that the TCP option stream does not guarantee. Use get_unaligned_be32() instead, which reads the value safely and already returns host byte order, so the htonl() on the comparison constant can be dropped. This matches the existing get_unaligned_be32() use later in the same function.
CVE-2026-23103
In the Linux kernel, the following vulnerability has been resolved: ipvlan: Make the addrs_lock be per port Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it's highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths.
CVE-2026-53360
In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use As per the GHCB spec, when using GHCB v2+ require the software scratch area to reside in the GHCB's shared buffer. Note, things like Page State Change (PSC) requests _rely_ on this behavior, as the guest can't provide a length when making the request, i.e. the size of the guest payload is bounded by the size of the shared buffer. Failure to force usage of the GHCB, and a slew of other flaws, lets a malicious SNP guest corrupt host kernel heap memory, and leak host heap layout information. setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2), where exit_info_2 is guest-controlled. With exit_info_2=24, this yields a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only entries[0] and entries[1] are in-bounds. snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253) but NOT against the actual buffer size: idx_end = hdr->end_entry; if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer snp_complete_psc(svm, ...); return 1; } for (idx = idx_start; idx <= idx_end; idx++) { entry_start = entries[idx]; // OOB when idx >= 2 The guest sets end_entry=10+, causing the host to iterate entries[2+] which are OOB into adjacent slab objects. For each OOB entry: - The host reads 8 bytes (OOB READ / info leak oracle) - If the data passes PSC validation, __snp_complete_one_psc() writes cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806) - If validation fails, the error response reveals whether adjacent memory is zero vs non-zero (information disclosure to guest) The guest controls allocation size (exit_info_2), entry range (cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly hit different slab positions. By exploiting the variety of bugs, a malicious SEV-SNP guest can: - OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure) - OOB write cur_page bits into adjacent objects (heap corruption) - Trigger use-after-free conditions across VMGEXITs E.g. with KASAN enabled, a single insmod of the PoC guest module produces 73 KASAN reports: BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890 Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199 BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890 Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199 The buggy address belongs to the object at ffff888XXXXXXXXX which belongs to the cache kmalloc-cg-32 of size 32 The buggy address is located N bytes to the right of allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX) Breakdown: 62 slab-out-of-bounds (reads + writes past allocation) 7 slab-use-after-free 4 use-after-free All credit to Stan for the wonderful description and reproducer! [sean: write changelog]
CVE-2026-53365
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix zerocopy completion for multi-skb sends When a large message is fragmented into multiple skbs, the zerocopy uarg is only allocated and attached to the last skb in the loop. Non-final skbs carry pinned user pages with no completion tracking, so the kernel has no way to notify userspace when those pages are safe to reuse. If the loop breaks early the uarg is never allocated at all, leaking pinned pages with no completion notification. Fix this by following the approach used by TCP: allocate the zerocopy uarg (if not provided by the caller) before the send loop and attach it to every skb via skb_zcopy_set(), which takes a reference per skb. Each skb's completion properly decrements the refcount, and the notification only fires after the last skb is freed. On failure, if no data was sent, the uarg is cleanly aborted via net_zcopy_put_abort(). This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting") but was pre-existing.
CVE-2026-53398
In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo().
CVE-2026-63970
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule.
CVE-2026-64035
In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.
CVE-2026-64115
In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix UAF when peer resets connection during handshake vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.
CVE-2026-64162
In the Linux kernel, the following vulnerability has been resolved: idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init() In idpf_ptp_init(), read_dev_clk_lock is initialized after ptp_schedule_worker() had already been called (and after idpf_ptp_settime64() could reach the lock). The PTP aux worker fires immediately upon scheduling and can call into idpf_ptp_read_src_clk_reg_direct(), which takes spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering the lockdep "non-static key" warning: [12973.796587] idpf 0000:83:00.0: Device HW Reset initiated [12974.094507] INFO: trying to register non-static key. ... [12974.097208] Call Trace: [12974.097213] [12974.097218] dump_stack_lvl+0x93/0xe0 [12974.097234] register_lock_class+0x4c4/0x4e0 [12974.097249] ? __lock_acquire+0x427/0x2290 [12974.097259] __lock_acquire+0x98/0x2290 [12974.097272] lock_acquire+0xc6/0x310 [12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190 [12974.097318] ? finish_task_switch.isra.0+0xd2/0x350 [12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp] [12974.097343] _raw_spin_lock+0x30/0x40 [12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097391] ? kthread_worker_fn+0x88/0x3d0 [12974.097404] ? kthread_worker_fn+0x4e/0x3d0 [12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf] [12974.097428] ? _raw_spin_unlock_irq+0x28/0x50 [12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf] [12974.097454] ptp_aux_kworker+0x20/0x40 [ptp] [12974.097464] kthread_worker_fn+0xd5/0x3d0 [12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10 [12974.097482] kthread+0xf4/0x130 [12974.097489] ? __pfx_kthread+0x10/0x10 [12974.097498] ret_from_fork+0x32c/0x410 [12974.097512] ? __pfx_kthread+0x10/0x10 [12974.097519] ret_from_fork_asm+0x1a/0x30 [12974.097540] Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock is not touched before it's been initialized.
CVE-2026-72317
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction.
CVE-2026-74744
In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.
CVE-2026-89530
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject inline replies that overflow the pull-up buffer An RPC-over-RDMA client can request a reply, such as an NFS READ payload, without providing a Write list or a Reply chunk to carry it. When such a reply needs more scatter/gather entries than the device's Send Queue supports, svc_rdma_pull_up_needed() selects pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size bytes, while the reply on this path is bounded only by the client's request, so svc_rdma_xb_linearize() copies past the end of the buffer and corrupts adjacent slab memory. The oversized length is then stored in sc_sges[0].length and posted, so the device also reads beyond the mapped region. The SGE-exhaustion branch is the only pull-up path that can exceed the buffer: the threshold branch pulls up only replies smaller than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE budget are sent directly without linearization. Make svc_rdma_pull_up_needed() report -E2BIG when the reply it would pull up cannot fit sc_max_req_size, and fail the request with ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping the connection. The helper no longer answers a simple yes/no question: it now reports pull-up, no pull-up, or -E2BIG for a reply too large to linearize. Rename svc_rdma_pull_up_needed() to svc_rdma_check_pull_up() so its name no longer implies a boolean predicate.
CVE-2026-89663
In the Linux kernel, the following vulnerability has been resolved: nfsd: revoke copy-notify stateids before dropping their reference Copy-notify stateids live in the s2s_cp_stateids IDR and on their parent stid's sc_cp_list, pinned by a single membership reference. _free_cpntf_state_locked() only unlinks an entry once its refcount reaches zero, so any revoke path that runs while a concurrent find_cpntf_state()/manage_cpntf_state() holder has elevated cs_count drops the reference without unlinking, leaving the entry discoverable with its membership reference already consumed. A second revoke or a laundromat tick then frees it while the reader still holds the pointer -- a KASAN-detectable use-after-free at the reader's nfs4_put_cpntf_state(). This affected all three revoke paths: - The parent-stid drain (nfs4_free_cpntf_statelist()) repeatedly called _free_cpntf_state_locked() on the first list entry; a holder that had bumped cs_count made it return early, so the next iteration re-decremented and burned the holder's reference. - OFFLOAD_CANCEL (manage_cpntf_state()) and laundromat expiry likewise used _free_cpntf_state_locked() and could drop 2->1 without unlinking. Add revoke_cpntf_state_locked(), which unhashes the entry from the IDR and sc_cp_list first (deferring the final free to any holder), and use it from all three revoke paths. The drain now walks with list_for_each_entry_safe() and revokes each entry unconditionally, so it terminates in one pass per entry regardless of cs_count. The unhash is gated on !list_empty(&cps->cp_list); the idr_remove() gate matters because idr_alloc_cyclic() may have recycled the so_id by then. Keep _free_cpntf_state_locked() for the reference-holder put path only, where a concurrent revoke may already have unlinked the entry (its list_del_init() then a no-op).
CVE-2026-89669
In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize copy-notify stateid before publishing it nfsd4_copy_notify() finished initializing the cpntf state after nfs4_alloc_init_cpntf_state() had already linked it into the s2s_cp_stateids IDR and the parent's sc_cp_list, with cs_count == 1 (the membership reference) and none held for the caller. A racing OFFLOAD_CANCEL (crafted cl_id == nn->s2s_cp_cl_id plus the guessable so_id) could reach manage_cpntf_state() and free the entry, turning the caller's subsequent cpn_cnr_stateid read and cp_p_stateid/cp_p_clid writes into use-after-free. The owning clientid was also only recorded after publication, so it could not gate an ownership check in that window. Record cp_p_stateid and cp_p_clid inside nfs4_alloc_init_cpntf_state() before nfs4_init_cp_state() publishes the entry, and return it with an extra reference. The caller reads the stateid under that reference and drops it with nfs4_put_cpntf_state(); on a late error the laundromat reaps the entry.
CVE-2026-89690
In the Linux kernel, the following vulnerability has been resolved: nfsd: defer vfree of compound ops to fix rpc_status UAF The rpc_status netlink dumpit walks every in-flight svc_rqst under rcu_read_lock and, for NFSv4 requests, reads opnums out of args->ops[]. But args->ops is a separate vmalloc buffer freed synchronously by vfree() in nfsd4_release_compoundargs() at the end of every compound. The dumpit's rcu_read_lock pins the svc_rqst struct itself (freed via kfree_rcu), but nothing defers the vfree of the ops buffer across the RCU grace period. A concurrent compound completion can therefore free the buffer while the dumpit is reading it — a use-after-free on vmalloc memory. The trailing seqcount recheck (smp_load_acquire of rq_status_counter) cannot undo a load that already retired against freed memory. Fix by replacing vfree(args->ops) with kvfree_rcu_mightsleep(), which defers the free until after an RCU grace period. This makes the existing rcu_read_lock in the dumpit sufficient to protect the read. The tradeoff is that completed compound ops buffers (up to 200 * sizeof(struct nfsd4_op)) persist in memory slightly longer, across one grace period, before being reclaimed.